If you have an Office Depot file cabinet with a broken lock, don’t worry! Replacing the lock is easy and only takes a few minutes. Here’s what you need to do:
First, remove the old lock from the file cabinet. To do this, unscrew the two screws that hold it in place. Then, take out the old lock cylinder by pushing it out from the back of the lock.
Next, insert the new lock cylinder into the hole where the old one was. Make sure that it is facing the right way so that the keyhole is on top. Once it is in place, screw in the two screws to secure it.
Finally, test out your new lock to make sure it works properly. If everything looks good, then you’re all set!
- Open the file cabinet drawer and remove all contents
- Unscrew the old lock from the file cabinet using a screwdriver
- Insert the new lock into the file cabinet where the old one was located and screw it in place with a screwdriver
- Close the file cabinet drawer and test that the new lock is working properly by trying to open it with the key
Credit: www.amazon.com
How Do I Change My Office Cabinet Lock?
If your office cabinet lock is not working properly, or if you need to change the combination, there are a few things you can do. First, try using a different key. If that doesn’t work, then you will need to remove the lock and take it apart.
To do this, first find the screws that hold the lock in place. Once you have removed the screws, the faceplate of the lock should come off easily. Inside the faceplate, there is a release lever that you will need to push down in order to remove the cylinder from the housing.
With the cylinder removed, you can now see the tumblers inside. To change the combination, simply move each tumbler to a new position. Be sure to write down your new combination before reassembling everything!
How Do You Put a Lock Back in a Filing Cabinet?
Assuming you are referring to a standard drawer lock found on many filing cabinets:
1. Insert the key into the lock and turn it clockwise until it stops. This will move the locking bar out of the way so that you can open the drawer.
2. With the drawer open, locate the small metal tab on the inside of the drawer near where the lock is mounted. This tab engages with a slot in the locking bar when the drawer is closed and locked, preventing it from being opened without a key.
3. Press down on this tab (it may be necessary to use a small screwdriver or other implement to get enough leverage) and hold it while you close and latch the drawer shut.
How Do I Change the Lock on a File Drawer?
Most file cabinets come with a keyed lock that can be changed if you need to. To change the lock on a file drawer, start by removing the old lock. To do this, insert a small screwdriver or paperclip into the hole in the center of the lock and turn it counterclockwise until the locking mechanism pops out.
Then, use a Phillips head screwdriver to remove the two screws that hold the locking plate in place. Once the screws are removed, you can slide the old lock off of the drawer.
Can You Replace a Cabinet Lock?
Yes, you can replace a cabinet lock. There are a few different ways to go about this, depending on the type of lock you have. If you have a traditional keyed lock, you can simply remove the old lock and install a new one in its place.
If you have a more modern electronic lock, you may need to purchase a new locking mechanism for your cabinets.
How to Install File Cabinet Lock
How to Replace File Cabinet Lock
If your filing cabinet lock is broken or damaged, you’ll need to replace it to keep your documents safe and secure. Here’s how to do it: 1. Start by purchasing a replacement lock that is the same model as the one you’re replacing.
This will ensure that the new lock fits into the existing hole in the cabinet door.
2. Remove the old lock by unscrewing it from the inside of the cabinet door. If the screw is difficult to remove, you may need to use a drill or other power tool to get it out.
3. Once the old lock is removed, install the new lock by screwing it into place. Be sure to tighten the screws securely so that the new lock is firmly in place.
4. Test the new lock by trying to open and close the cabinet door with it. If everything works properly, then you’re all set!
Conclusion
If your Office Depot file cabinet lock is not working properly, you can replace it with a new one. First, remove the old lock by unscrewing it from the file cabinet. Then, take the new lock and screw it into place.
Make sure that the new lock is tight so that it will not come loose.